Neschen FILMOprint Easy 100 MP Nolite

Options

6038486 - 6040352 - 6038508 - 6058509

Neschen FILMOprint Easy 100 Nolite is a white glossy 100 micron monomeric PVC with a permanent dark grey adhesive to prevent show through when applying to background substrates/images. Water and scratch resistant with a B1 and M1 fire certification. Commonly used for vibrant, colourful interior and exterior applications, e.g. signage, stand construction, point of sale campaigns, labels/decals.

 

         

Product Information

Neschen FILMOprint Easy 100 MP Nolite

General Information 

  • 100 µm monomeric PVC-film
  • one-sided self-adhesive, white and cadmium-free
  • coated with a solvent-free, age-resistant and permanent elastic acrylate adhesive
  • the dark pigmented adhesive prevents shining through of the background
  • Matt surface
  • no chemical reactions between solvent-based inks and acrylate adhesive  

Areas of Application 

  • suitable for (Eco) Solvent-, Latex- and UV-curable inks
  • for application on a wide range of substrates (on most of the commercially available panels etc.)
  • not recommended for backlit applications - suitable for indoor and outdoor applications - durability (unprinted) by expert processing under vertical outdoor exposure (standard Central European climate)
  • due to permanent adhesive ideal suitable for short to midterm applications
  •  can be applied on smooth and slightly curved surfaces
  • Please note that due to the multiple areas of application of this material (combined with various films, sheets of PVC or other application substrates) physically- determined dimensional fluctuation might occur that can possibly be triggered by fluctuations in temperature during processing and/or during actual application. For this reason, all specifications in our technical information are meant as references, and explicitly not intended as a basis for warranty or guarantee. Because it is impossible to test every possible print/application combination, we recommend customers conduct their own tests to see if the material is qualified for the actual end-use. 

Processing & Handling 

  • to avoid problems in processing/lamination ensure adequate drying before lamination
  • drying time of min. 24 hours is recommended
  • storage is best to be done in upright position in the original case
  • surfaces must be properly prepared and free of contamination
  • applying by assistance of water is not recommended
  • stretching should be minimised as much as possible to prevent excessive shrinking
  • shrinking of the edges on monomeric vinyl may occur during storage time

Further Information

Neschen FILMOprint Easy 100 MP Nolite

Neschen FILMOprint Easy 100 Technical Information & Certificate.